Payment & Shipping Terms:
|Product Name:||24 Zones Door Frame Metal Detector Walk Through Gate Use For Outdoor||Sensitivity:||Each Zone Has 256 Sensitivity Level|
|Display Way:||LCD Display||Working Frequency:||4KHZ—8KHZ|
|Power Supply:||AC85V-264V||Warranty:||2 Years|
|Input Voltage:||100-240V, 50/60Hz||Power:||<30W|
|Alarm:||Visible And Audible Alarm||Working Temperature:||-30℃ ~ 70℃|
walk through security scanners,
walk through safety gate
Easy Assembly Body Walk Through Metal Detectors Muilt Zones With 5.7 Inch LCD Screen
Input voltage: 100-240V, 50/60Hz
Net weight: 65KG
Working temperature: -20℃ ~ 45℃
Alarm: Visible and audible alarm
Inner Dimensions: 2000mm (High) x 700mm (Wide) x 605mm (Deep)
External Dimensions: 2230mm (High) x 830mm (Wide) x 730mm (Deep)
【PERFORMANCE AND FEATURES】
Accurate Positioning: 24 overlapping network detection zone,bilateral transmit and receive, can be accurately positioned todetect objects, intuitive display of the target location.
Micro Processor Technology: the scanning electromagnetic wave generated by the microcomputer control circuit, the scanning rate can be precisely controlled.
Sensitivity Adjustable: each detection zone has 256 sensitivity levels (0 ~ 255). Preset metal size, you can exclude the coins,keys, jewelry, belt buckle etc.
Digital Pulse Technology: digital signal processing and filtering system, has excellent anti-interference ability.
Password Protection: only the correct password can changes the sensitivity and other parameters. Password with four digits, can be set by the user.
Count Statistics: pass count and alarm count. Harmless to human body: harmless to heart pacemaker, pregnant
women, magnetic floppy disk, recording tapes etc.
Power Supply Security: the power supply on the top of the control box, waterproof.
Waterproof Foot Cover: not only can fixed the device, but also waterproof.
1. Remove the package of control unit and door panel.
2. Put the control unit case and door panels as above picture
~ 8 ~
shown, then connect the left and right door panel with the control
unit case by bolts and nuts. Tighening screws.
3. Probe line of the left and right door panel tight inserted into the
motherboard corresponding socket respectively.
4. Install the screw on the control unit case cover.
5. Lift the walk through metal detector to the vertical position and
move to the assigned position.
6. Plug power cable
Contact Person: Ms. Angelia Yuan